-- *********************************************************************
-- CISCO-FEATURE-CONTROL-MIB.my: Feature Control MIB
--
-- November 2003, Sanjeev C Joshi
--
-- Copyright (c) 2003, 2004 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************CISCO-FEATURE-CONTROL-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPEFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
TEXTUAL-CONVENTIONFROM SNMPv2-TC
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoFeatureCtrlMIB MODULE-IDENTITYLAST-UPDATED"200412280000Z"
ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-san@cisco.com"DESCRIPTION"There are two types of features in the system:
- Regular features
- Optional features
The Regular features may or may not need to support
the user triggerd control (enabling/disabling). In
case the regular features need to support such
control, they need to be instrumented in their
respective MIBs.
The Optional features can be controlled (enabled/
disabled) by the user via CLI/SNMP. The optional
features are generally disabled by default. As part
of the enabling of such optional feature, the first
mandatory step is to explicitly enable the feature
using the CLI/SNMP. Following this mandatory step,
a feature may require additional feature specific
enabling steps similar to the regular features.
In addition to the user triggered control, other
system specific conditions like licensing may
influence the operating state of such optional
feature.
This MIB module is to facilitate the global level
control (enabling/disabling) over the optional
features in the system. The disabling of such
optional feature using this MIB module would make
the feature disabled and the entire feature specific
mib objects also unavailable.
Glossary of the terms used in this MIB:
VSAN - Virtual Storage Area Network, similar to
a VLAN.
WWN - World Wide Name. Mechanism of identifying
devices in Fibre Channel Networks. It is
8 bytes long.
AAA - Authentication, Authorization and Accounting
FLOGI - Fibre Channel fabric login
MDS - Multilayer Director Switch
"REVISION"200412280000Z"DESCRIPTION"Updated 'CiscoOptionalFeature' TC for
the 'extendedCredit' feature.
"REVISION"200407060000Z"DESCRIPTION"Updated 'CiscoOptionalFeature' TC for the following
new optional features:
- ike
- isns
- ipSec
- portTracker
- scheduler
- npiv
- sanExtTuner
- dpvm
"REVISION"200311220000Z"DESCRIPTION"Initial version of this MIB."::={ ciscoMgmt 377}--
-- Feature Control MIB object definitions
--ciscoFeatureCtrlMIBNotifs OBJECTIDENTIFIER::={ ciscoFeatureCtrlMIB 0}ciscoFeatureCtrlMIBObjects OBJECTIDENTIFIER::={ ciscoFeatureCtrlMIB 1}ciscoFeatureCtrlMIBConformance OBJECTIDENTIFIER::={ ciscoFeatureCtrlMIB 2}cfcFeature OBJECTIDENTIFIER::={ ciscoFeatureCtrlMIBObjects 1}--
-- Textual Conventions
--CiscoOptionalFeature ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The optional features in the sytem.
ivr - Inter VSAN Routing
fcip - Fibre Channel over IP Protocol
fcsp - Fibre Channel Security Protocol
ficon - Fibre Connectivity interface
iscsi - iSCSI (Internet Small Computer
System Interface) protocol
tacacs - Tacacs+ AAA protocol
qosManager - Quality Of Service
portSecurity - Port Security
fabricBinding - Fabric Binding
iscsiInterfaceVsanMembership - iSCSI-Interface-VSAN
membership
ike - Internet Key Exchange feature. This
is used to negotiate cryptographic
keys for IPsec traffic
isns - iSNS (Internet Storage Name Service)
server. This provides name service,
access control and state change
notifications for iSCSI devices
ipsec - IPSec security services on the device
portTracker - Port Tracker. This allows ports to be
brought down and up based on changes
in the port states of certain
configured (tracked) ports
scheduler - Scheduler feature provides jobs to be
scheduled at a specified time. A Job is
a collection of configuration commands
in the device.
npiv - Nx_Port ID Virtualization. This is a
mechanism by which a N_Port can get more
than one Nx_Port_Id from the fibre
channel (FC) fabric
sanExtTuner - SAN Extension Tuner. This is a tool
used to generate and analyze SCSI
workloads across the FCIP tunnels.
This can be used to tune the FCIP
tunnels for desired throughput.
dpvm - Dynamic Port Vsan Membership. This
manages allocation of VSAN to a port
based on the device WWN at the time of
device FLOGI
extenedCredit - Extended Credit feature. This provides
a way to increase the receive buffer
to buffer credits on physical FC Ports
."SYNTAXINTEGER{ivr(1),fcip(2),fcsp(3),ficon(4),iscsi(5),tacacs(6),qosManager(7),portSecurity(8),fabricBinding(9),iscsiInterfaceVsanMembership(10),
ike(11),isns(12),ipSec(13),portTracker(14),scheduler(15),npiv(16),sanExtTuner(17),dpvm(18),extenedCredit(19)}CiscoFeatureAction ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Action trigger for the feature.
noOp(1) - No operation
enable(2) - Enable the feature
disable(3) - Disable the feature
."SYNTAXINTEGER{noOp(1),enable(2),
disable(3)}CiscoFeatureStatus ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Status of the feature.
unknown(1) - Unknown status
enabled(2) - Feature is operational and available
disabled(3) - Feature is disabled and not available
."SYNTAXINTEGER{unknown(1),enabled(2),disabled(3)}CiscoFeatureActionResult ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Result of the feature enable/disable action.
none(1) - No action triggered
actionSuccess(2) - Execution of the action triggered
is completed Successfully
actionFailed(3) - Execution of the action failed
actionInProgress(4) - Execution of the action triggered
is in progress
."SYNTAXINTEGER{none(1),actionSuccess(2),actionFailed(3),actionInProgress(4)}--
-- Feature Control Table - cfcFeatureCtrlTable
--cfcFeatureCtrlTable OBJECT-TYPESYNTAXSEQUENCEOF FCFeatureCtrlEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table consisting of entries for all the features that can
be optionally enabled/disabled in the system. This table
provides administrative control and current operating state
information of the feature."::={ cfcFeature 1}cfcFeatureCtrlEntry OBJECT-TYPESYNTAX FCFeatureCtrlEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry (conceptual row) in the 'cfcFeatureCtrlTable'.
Each row represents an optional feature in the system."INDEX{ cfcFeatureCtrlIndex }::={ cfcFeatureCtrlTable 1}
FCFeatureCtrlEntry ::=SEQUENCE{
cfcFeatureCtrlIndex CiscoOptionalFeature,
cfcFeatureCtrlName SnmpAdminString,
cfcFeatureCtrlAction CiscoFeatureAction,
cfcFeatureCtrlLastAction CiscoFeatureAction,
cfcFeatureCtrlLastActionResult CiscoFeatureActionResult,
cfcFeatureCtrlLastFailureReason SnmpAdminString,
cfcFeatureCtrlOpStatus CiscoFeatureStatus,
cfcFeatureCtrlOpStatusReason SnmpAdminString}cfcFeatureCtrlIndex OBJECT-TYPESYNTAX CiscoOptionalFeature
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A unique index representing the feature in this entry."::={ cfcFeatureCtrlEntry 1}cfcFeatureCtrlName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A human readable unique string representing the name of
this feature."::={ cfcFeatureCtrlEntry 2}cfcFeatureCtrlAction OBJECT-TYPESYNTAX CiscoFeatureAction
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The action to be triggered for the feature. Setting the
value of this object to a value other than 'enable' or
'disable' does not trigger any action for the feature
and hence does not affect the value of corresponding
instance of 'cfcFeatureCtrlLastAction'. Retrieving the
value of this object via SNMP will always return 'noOp'."::={ cfcFeatureCtrlEntry 3}cfcFeatureCtrlLastAction OBJECT-TYPESYNTAX CiscoFeatureAction
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The last action triggered for the feature. If no action
has been triggered for the feature since the last reboot
of the sytem, then retrieving the value of this object
via SNMP will return 'noOp'."::={ cfcFeatureCtrlEntry 4}cfcFeatureCtrlLastActionResult OBJECT-TYPESYNTAX CiscoFeatureActionResult
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The result of execution of last action (represented by
value of 'cfcFeatureCtrlLastAction') for the feature. When
the value of this object is 'actionInProgress', the value
of the corresponding instance of 'cfcFeatureCtrlAction'
can not be modified."::={ cfcFeatureCtrlEntry 5}cfcFeatureCtrlLastFailureReason OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The failure reason description for the failed execution
of last action triggered for the feature.
If the corresponding instance of
'cfcFeatureCtrlLastActionResult' has the value
'actionFailed', then this object contains the reason
as to why it failed. Otherwise, the value of this
object is the zero-length string."::={ cfcFeatureCtrlEntry 6}cfcFeatureCtrlOpStatus OBJECT-TYPE
SYNTAX CiscoFeatureStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current operating status of the feature."::={ cfcFeatureCtrlEntry 7}cfcFeatureCtrlOpStatusReason OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The reason description for the current operating status
(represented by the value of corresponding instance of
'cfcFeatureCtrlOpStatus') of the feature.
The reason for the current operating status of the feature
could be other than explicit user triggered action on the
feature."::={ cfcFeatureCtrlEntry 8}--
-- Notifications
--ciscoFeatureOpStatusChange NOTIFICATION-TYPEOBJECTS{cfcFeatureCtrlOpStatus}STATUScurrentDESCRIPTION"Notification to indicate that the operational state of
this feature has changed. The 'cfcFeatureCtrlOpStatus'
indicates the new state of the feature."
::={ ciscoFeatureCtrlMIBNotifs 1}--
-- Conformance
--ciscoFeatureCtrlMIBCompliances OBJECTIDENTIFIER::={ ciscoFeatureCtrlMIBConformance 1}ciscoFeatureCtrlMIBGroups OBJECTIDENTIFIER::={ ciscoFeatureCtrlMIBConformance 2}ciscoFeatureCtrlMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement the
CISCO-FEATURE-CONTROL-MIB."MODULEMANDATORY-GROUPS{ cfcFeatureGroup,
cfcNotificationGroup}::={ ciscoFeatureCtrlMIBCompliances 1}--
-- Units of Conformance
--cfcFeatureGroup OBJECT-GROUPOBJECTS{ cfcFeatureCtrlName,
cfcFeatureCtrlAction,
cfcFeatureCtrlLastAction,
cfcFeatureCtrlLastActionResult,
cfcFeatureCtrlLastFailureReason,
cfcFeatureCtrlOpStatus,
cfcFeatureCtrlOpStatusReason }STATUScurrentDESCRIPTION"A collection of objects for controlling the features in
the system."::={ ciscoFeatureCtrlMIBGroups 1}cfcNotificationGroup NOTIFICATION-GROUPNOTIFICATIONS{ciscoFeatureOpStatusChange}STATUScurrentDESCRIPTION"A collection of notifications to monitor state of the
features."::={ ciscoFeatureCtrlMIBGroups 2}END